Please check your Spam Folder / Junk Box if you are not receiving our emails.
Also whitelist our email ID: no-reply@rice-puller.com & admin@rice-puller.com

Avatar

BUYERS AVAILABLE FOR OPEN ARTICLE (RP)

by Capitalmaker1 @, india, Monday, November 13, 2017, 12:49 PM (11 days ago)

Hi we are looking for open article

MODE OF OPERATION

1) DETAILS OF YOUR ARTICLE

1) MR
2)RR
3)WEIGHT
4)LOCATION
5)DEMAND
6)B/W RATIO

AFTER BASIC INFORMATION RELATED TO THE ARTICLE IS PASSED ON TO THE BUYER , SAMPLE OF YOUR ARTICLES WILL BE ASKED TO DELIVER ON OUR LABORATORY,   & IT'S GOVERNMENT APPROVED LABORATORY.   THESE ARE THE FOLLOWING SAMPLE & WORK PROCEDURE

(A) TEST MATERIALS REQUIRED : -*

*(1) CAMERA FILM KODAK 400   (2 PIECE)*

*(2) PLASTIC TORCH WITH PAPER BATTERY AND FILAMENT BULB   (2 PIECE)*

*3) DIGITAL WATCH   (2 PIECE)*

*4) MERCURY THERMOMETER   (2 PIECE)*

*5) SERGICAL/STERALIZES WATER TUBE (3 NOS)*

*6) 500ML BISLERI BOTTLE (1 NOS)*

*PROCESS FOR OBTAINING TEST:-*

*(1) FILM TEST - EVERY ROLL CONTAINS 36 FILMS. OUT OF 36 FILMS 12 WILL BE UTILIZED FOR THE TESTS. EVERY FILM HAS 2 SIDES. ONE IS LIGHT BROWN AND THE OTHER IS DARK BROWN. WE HAVE TO TAKE IMPRESSION BY TOUCHING AND   PRESSING THE FILM FOR 8-10 SECONDS ONTO THE SIDES OF THE FILM. FIRST 6 FOR ONE SIDE AND NEXT 6 FOR THE OTHER SIDE. THEN ROLL BACK THE FILM BACK IN IT'S COVER. PUT IT IN THE BLACK PLASTIC BOX IT COMES IN AND THEN PACK AS STATED AT THE END OF THIS MESSAGE.*

*(2) TORCH TEST - REMOVE THE GLASS OF THE TORCH. SWITCH ON THE TORCH. BRING IT VERY CLOSE TO THE MATERIAL. IT WILL FUSE. DO NOT REMOVE OR SWITCH OFF THE TORCH. KEEP IT NEAR TO THE MATERIAL AS CLOSE AS POSSIBLE IN ON STATE FOR ATLEAST 40 MIN. AFTER THAT PUT SOME COTTON ON THE BULB TO SECURE IT AND PACK THE WHOLE TORCH AS STATED BELOW.*

*(3) WATCH TEST - REMOVE THE STRAPS AND THE LID COVERING THE MECHANISM AT THE BACK. KEEP THE WATCH ON THE MATERIAL FOR   40 MIN. AFTER THAT CLOSE THE BACK LID ONLY. WRAP IT WITH A BIG PIECE OF COTTON AND FOLLOW PACKING INSTRUCTIONS.*

*(4) THERMOMETER - EVERY THERMOMETER HAVE A BULB CONTAINING MERCURY. KEEP THAT BULB PORTION ON THE MATERIAL FOR 40 MIN. AFTER THAT COVER THE ENTIRE THING WITH COTTON AND FOLLOW THE PACKING INSTRUCTIONS.*

*5) SERGICAL/STERILIZED WATER TEST - KEEP THE TUBES ON OR NEAR THE MATERIAL FOR 40 MINUTES. FOLLOW THE PACKING INSTRUCTIONS STATED BELOW*

*6) BISLERI BOTTLES - KEEP THE BOTTLES NEAR THE MATERIAL FOR 40 MINUTES. FOLLOW THE PACKING INSTRUCTIONS STATED BELOW*

*SYSTEM OF PACKING :-*
*(1) FIRST COVER EACH MTERIAL INDIVIDULLY WITH COTTON.*

*(2) THEN COVER EACH MATERIAL WITH WHITE SHEET BY CONTINUOUS WRAPPING. USE I COMPLETE SHEET FOR EACH MATERIAL. USE 2 FOR EACH TORCH.*

*(3) USE BROWN PAPER IN THE SAME WAY. ATLEAST 10 WRAPS MUST BE DONE.*

*(4) THEN USE ALUMINUM FOIL IN THE SAME WAY WITH AT LEAST 10 WRAPS.*

*(4) PUT IT IN A BLACK PLASTIC CARRY BAG 1st INDIVIDUALLY AND DIVIDE INTO 2 PARTS AS STATED IN OTHER MESSAGE*

*TRANSPORT THE MATERIAL FREELY. PLZ AVOID METAL DETECTORS.*

IF YOU CAN SATISFI THIS PROCESS   & DEMAND ? WE CAN DO THE BUSINESS FOR 100%

CONTACT US ON :   +917012423631 call / whatsapp / sms
email address      :   aj.143007666@gmail.com


                    Aj Jacob

         *|:*    Incredible India     *:|:*    Lebbo Coin     *:|:*    ♥ Love Lockup ♥    *:|*


Complete thread:

 RSS Feed of thread

  • BUYERS AVAILABLE FOR OPEN ARTICLE - Capitalmaker1,  2017-Nov-13, 12:49 PM  [*]
powered by my little forum
Using this site means you accept its terms (Revised on: Monday, 2014-May-12 / 03:52:46 pm).